|
|||||
|
|
| 面向装配、制造与成本的产品设计 | |
| 引用本文： | 曾庆良,万丽荣,熊光楞,方佳雨.面向装配、制造与成本的产品设计[J].煤炭学报,2000,25(6):636-640. |
| 作者姓名： | 曾庆良 万丽荣 熊光楞 方佳雨 |
| 作者单位： | 1. 清华大学,国家CIMS工程技术研究中心,北京,100084 2. 山东科技大学,山东,泰安,271019 3. 中国矿业大学,北京校区,北京,100083 |
| 基金项目： | 国家自然科学基金!资助项目 (6 99840 0 5 )，863/CIMS基础研究项目!(86 3 -5 11-842 -0 10 ) |
| 摘 要： | 提出了一种并行工程环境下面向装配、制造与成本的设计方法，该方法在产品的不同设计阶段，综合利用面向装配的设计（DFA）、面向制造的设计（DFM）与面向成本的设计（DFC）技术，对产品设计进行评价与分析，可以有效地提高产品的可装配性和零件的可加工性，缩短产品开发周期，降低产品成本。 |
| 关 键 词： | 并行工程 产品设计 装配 制造 成本 DFA DFM DFC |
An approach to product development based on DFA,DFM and DFC |
|
| ZENG Qing-liang ,WAN Li-rong ,XIONG Guang-leng ,FANG Jia-yu.An approach to product development based on DFA,DFM and DFC[J].Journal of China Coal Society,2000,25(6):636-640. | |
| Authors: | ZENG Qing-liang WAN Li-rong XIONG Guang-leng FANG Jia-yu |
| Abstract: | A product development approach based on Design for Assembly(DFA),Design for Manufacturing(DFM) and Design for Cost(DFC) is proposed. The method uses DFA, DFM and DFC technology to give evaluation and analysis of product design at different design stages of products to improve the assembly ability and manufacturability of the products. The development period of product can be shortened and its overall cost can be decreased by using this method. |
| Keywords: | concurrent engineering product design design for cost |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |