| 基于工业计算机断层成像的装药底隙无损检测方法研究 |
| |
| 引用本文： | 吕宁,徐更光.基于工业计算机断层成像的装药底隙无损检测方法研究[J].兵工学报,2015,36(1):157-162. |
| |
| 作者姓名： | 吕宁 徐更光 |
| |
| 作者单位： | （北京理工大学 爆炸科学与技术国家重点实验室， 北京 100081） |
| |
| 摘 要： | 在弹药装药底隙检测中，运用密度对比法结合体积效应，将底隙测量转化为弹底密度变化的测量，建立弹底扫描断层中心部位计算机断层成像（CT）值变化与底隙值之间的数学模型，解决底隙测量理论与实际操作中的难题。预置底隙测量实验结果表明：该模型可完成对0.20~0.50 mm底隙的测量，最大相对误差小于3.5%，可实现对装药底隙的定性判断与定量检测。
|
| 关 键 词： | 兵器科学与技术 工业计算机断层成像 密度对比 底隙 定量检测 |
| 收稿时间： | 2014-02-10 |
Inspection of Base separation of Charge by Industrial CT Imaging |
| |
| LYU Ning,XU Geng-guang.Inspection of Base separation of Charge by Industrial CT Imaging[J].Acta Armamentarii,2015,36(1):157-162. |
| |
| Authors: | LYU Ning XU Geng-guang |
| |
| Affiliation: | (State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China) |
| |
| Abstract: | A volume effect of industrial computed tomography(CT) imaging and a contrast method for density inspection are used to build an algebraic model for base separation inspection, which improves the base separation inspection method in theoretical and practical ways. The size information is qualitatively and quantitatively analyzed with high precision by the fluctuation of inspected CT values. The experimental results of base separation inspection show that the density contrast model is suitable for the inspection of 0.20~0.50 mm base separation, and the relative error is less than 3.5%. |
| |
| Keywords: | ordnance science and technology industrial computed tomography density contrast base separation quantitative inspection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
