| 中国航海博物馆关节轴承节点承载力试验研究 |
| |
| 引用本文： | 张慎伟,张其林,周向阳,杨宗林,汤海林,李亚明,周晓峰.中国航海博物馆关节轴承节点承载力试验研究[J].建筑结构,2009(9). |
| |
| 作者姓名： | 张慎伟 张其林 周向阳 杨宗林 汤海林 李亚明 周晓峰 |
| |
| 作者单位： | 山东大学土建与水利学院;同济大学土木工程学院;上海现代建筑设计集团有限公司; |
| |
| 摘 要： | 中国航海博物馆帆体钢结构三铰拱的3个节点及边箱梁底部节点均采用关节轴承节点的形式以满足完全铰接的构造要求。因在不同荷载组合下,节点处可能承受拉力也可能承受压力,使得轴承节点的构造极其复杂。为验证此轴承节点的受力性能和承载力,进行了一个1/2缩尺模型试验和有限元分析。试验结果表明,在3.77倍的设计荷载水平作用下节点没有发生破坏,其极限承载力完全满足设计要求。试验结果和数值分析结果表明,该节点具有足够的安全性,满足工程应用的要求。
|
| 关 键 词： | 轴承节点 缩尺模型 试验研究 极限承载力 有限元分析 |
Experimental research on load capacity of the bearing joints in Chinese Navigation Museum |
| |
| Zhang Shenwei,Zhang Qilin,Zhou Xiangyang,Yang Zonglin,Tang Hailin,Li Yaming,Zhou Xiaofeng.Experimental research on load capacity of the bearing joints in Chinese Navigation Museum[J].Building Structure,2009(9). |
| |
| Authors: | Zhang Shenwei Zhang Qilin Zhou Xiangyang Yang Zonglin Tang Hailin Li Yaming Zhou Xiaofeng |
| |
| Affiliation: | 1 College of Civil Engineering;Shandong University;Jinan 250061;China;2 College of Civil Engineering;Tongji University;Shanghai 200092;3 Shanghai Xian Dai Architectural Design Group;Shanghai 200041;China |
| |
| Abstract: | The bearing joints were used in the three-pin arch and the side girder beam bottom in Chinese Navigation Museum in order to satisfy with the qualification of flexible joints.Both tension and compression maybe occur in this joint for different kind of load combinations,which lead to the complex structure of the bearing joint.In order to know about the behavior and ultimate capacity of this kind of joints,one specimen scaled in one-twice proportional to its prototype was tested under monotonic loadings and fi... |
| |
| Keywords: | bearing joint reduced scale model experimental research ultimate capacity FEM analysis |
| 本文献已被 CNKI 等数据库收录！ |
