| 线缆-机箱电磁兼容分析的PEEC-MoM混合方法 |
| |
| 引用本文： | 杨福荣,李鹏,许万业,魏茂刚,李勋.线缆-机箱电磁兼容分析的PEEC-MoM混合方法[J].西安电子科技大学学报,2016,43(6):147-151+157. |
| |
| 作者姓名： | 杨福荣 李鹏 许万业 魏茂刚 李勋 |
| |
| 作者单位： | (1. 西安电子科技大学 电子装备结构设计教育部重点实验室，陕西 西安 710071;2. 西南电子设备研究所，西川 成都 610036) |
| |
| 基金项目： | 国家自然科学基金资助项目(51490660)；国家自然科学基金面上资助项目(51475348) |
| |
| 摘 要： | 针对线缆-机箱系统的电磁兼容性问题，提出了一种部分元等效电路法与矩量法混合的数值分析方法．利用部分元等效电路法建立线缆、电连接器和内部印刷电路板的等效高频电路模型，通过电路分析方法得到其激励特性，并基于能量守恒定理将其等效为辐射偶极子天线，最后加入矩量法分析的机箱屏效模型中，进行内部电路板信号完整性分析和机箱屏效计算．机箱内部印刷电路板信号完整性分析结果与商用软件微波仿真工作室的计算结果吻合良好，线缆机箱屏效实验测试结果与分析结果同样吻合良好，计算精度满足电磁兼容工程分析的需要，表明了文中所提方法的有效性．
|
| 关 键 词： | 线缆机箱 电连接器 部分元等效电路法 信号完整性 屏效 |
| 收稿时间： | 2015-11-10 |
PEEC-MoM hybrid method for electromagnetic compatibility analysis of the cable-enclosure system |
| |
| YANG Furong,LI Peng,XU Wanye,WEI Maogang,LI Xun.PEEC-MoM hybrid method for electromagnetic compatibility analysis of the cable-enclosure system[J].Journal of Xidian University,2016,43(6):147-151+157. |
| |
| Authors: | YANG Furong LI Peng XU Wanye WEI Maogang LI Xun |
| |
| Affiliation: | (1. Ministry of Education Key Lab. of Electronic Equipment Structure, Xidian Univ., Xi'an 710071, China;
2. Southwest China Research Institute of Electronic Equipment, Chengdu 610036, China) |
| |
| Abstract: | For the EMC problem of a cable(with connector)-enclosure(with PCB) system, a hybrid numerical analysis method for the partial element equivalent circuit (PEEC) and the method of moment (MoM) is proposed. The PEEC is used to model the cable-connector-PCB, and the electromagnetic properties could be calculated by the circuit method. Based on energy conservation, the cable-connector is replaced by an equivalent dipole which has similar electromagnetic radiation properties. The equivalent dipole is added to the model of the enclosure which is analyzed by the MoM. Then the shielding effectiveness of the enclosure and the signal integrity of the PCB in the enclosure can be obtained. An experiment is designed to verify the proposed hybrid method. The test results and simulated results are in good agreement. This hybrid method could be used to calculate not only the signal integrity of the cable and PCB, but also the shielding effectiveness of the cable-enclosure system. |
| |
| Keywords: | |
|
| 点击此处可从《西安电子科技大学学报》浏览原始摘要信息 |
|
点击此处可从《西安电子科技大学学报》下载全文 |
