| Al基复合石英光导纤维材料的制备方法 |
| |
| 引用本文： | 赵志江,王继杰,左良,崔建忠,孙旭东.Al基复合石英光导纤维材料的制备方法[J].材料与冶金学报,2005,4(2):152-154. |
| |
| 作者姓名： | 赵志江 王继杰 左良 崔建忠 孙旭东 |
| |
| 作者单位： | 1. 东北大学,材料与冶金学院,辽宁,沈阳,110004
2. 沈阳航空工业学院,材料工程系,辽宁,沈阳,110034 |
| |
| 摘 要： | 采用铸造方法将Al与石英光导纤维进行液固相复合,制成具有一定耐高温、耐腐蚀能力的Al基复合光导纤维及传感器材料.试验结果表明,直径为0.15～0.3 mm的石英光导纤维可以抵抗高温熔融金属液在铸造浇注过程中的冲击,凝固过程的温度急速变化也未对石英光导纤维造成破坏.该方法可制备出矩阵排列的Al基复合光导纤维传感显示材料.
|
| 关 键 词： | 石英光导纤维 金属基体 复合 耐高温性能 传感显示材料 |
| 文章编号： | 1671-6620(2005)02-0152-03 |
| 修稿时间： | 2005年2月10日 |
Fabrication of Al-based silicon-fiber composite material |
| |
| ZHAO Zhi-jiang,WANG Ji-jie,ZUO Liang,CUI Jian-zhong,SUN Xu-dong.Fabrication of Al-based silicon-fiber composite material[J].Journal of Materials and Metallurgy,2005,4(2):152-154. |
| |
| Authors: | ZHAO Zhi-jiang WANG Ji-jie ZUO Liang CUI Jian-zhong SUN Xu-dong |
| |
| Abstract: | Silicon fiber was cast into Al and a new fiber composite with higher heat-resistance and corrosion resistance was obtained. The effects of casting and solidifying of molten metal on fiber were studied, and the result showed that the intense impact of molten metal does not destroy the fiber. The changing of heat-stress also does not affect the fiber greatly. The fiber can be disposed as matrix during casting and the composite can be used as sensor and display apparatus. |
| |
| Keywords: | silicon fiber metal matrix composite heat-resistance sensor and display materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
