Hydration monitoring of cement-based materials with resistivity and ultrasonic methods

Two test setups, the electrical resistivity and ultrasonic techniques, were used to monitor the hydration process of cement-based materials. In the electrical resistivity method, a non-contacting device was used. In the ultrasonic method, a wave was transmitted and measured by the embedded piezoelectric ultrasonic transducers, which had good coupling with the surrounding materials. The focus of the study was to detect the setting and hardening behaviors of cement paste during the first 7 days of hydration using the above techniques. Immediate after placing the cement paste into the mould, the measurement started and continued throughout the hydration process. The obtained resistivity and ultrasonic data were used to interpret the hydration process of the specimens. The correlation of two techniques was also studied. The results illustrated that both electrical resistivity and ultrasonic techniques were effective to accurately monitor the hydration of cement pastes. The resistivity method was able to study both the chemical reaction and physical change during hydration, while ultrasonic method was sensitive to physical change of cement only.