| 打印机端盖热流道注射模设计 |
| |
| 引用本文： | 张维合,舒天雄.打印机端盖热流道注射模设计[J].模具工业,2012,38(5):52-55. |
| |
| 作者姓名： | 张维合 舒天雄 |
| |
| 作者单位： | 1. 广东科技学院,广东东莞,523083
2. 东莞事通达机电科技有限公司,广东东莞,523083 |
| |
| 摘 要： | 分析了某打印机左、右端盖成型工艺,介绍了左、右端盖热流道注射模结构,为成型塑件外侧倒扣和4处内侧倒扣,模具采用了分体式斜推杆结构,其中一个斜推杆上还增设了横向推杆。模具侧向抽芯机构新颖,抽芯动作稳定可靠,冷却系统设计合理,可为类似塑件的注射模设计提供参考。
|
| 关 键 词： | 打印机端盖 热流道 注射模 分体式斜推杆 |
Design of hot runner injection mould for printer cover |
| |
| ZHANG Wei-he
,
SHU Tian-xiong.Design of hot runner injection mould for printer cover[J].Die & Mould Industry,2012,38(5):52-55. |
| |
| Authors: | ZHANG Wei-he SHU Tian-xiong |
| |
| Affiliation: | 1.Guangdong University of Science and Technology, Dongguan, Guangdong 523083, China; 2.Dongguan Shitongda Electrical Technology Co., Ltd, Dongguan, Guangdong 523053, China) |
| |
| Abstract: | The molding process of a printer cover was analyzed and the injection mould structure was introduced. In order to form the lateral buckles and the 4 inner buckles, a split-type slanted pushing rod was adopted in the mould, with a txansverse pushing rod in one of the slanted rods. The side core pulling mechanism is novel and the pulling is reliable. |
| |
| Keywords: | printer cover hot runner injection mould split-type slanted pushing rod |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
