Electropolymerization and characterization of polyaniline, poly(2-anilinoethanol) and poly(aniline-co-2-anilinoethanol)

Applications of conducting polymers to biosensors have recently aroused much interest. This is because these molecular electronic materials offer control of different parameters such as polymer layer thickness, electrical properties and bio-reagent loading, diversity, ease of fabrication and potentially low cost, etc. Polyaniline, poly(2-anilinoethanol) and poly(aniline-co-2-anilinoethanol) preparations are performed with electrochemical (CV) method at room temperature, in a standard three-electrode cell. Homopolymer and the copolymers of aniline and 2-anilinoethanol films were deposited from 1?M acidic aqueous media containing 0.2?M aniline, 2-anilinoethanol by voltammetric sweep between ?0.1 and 1 V Ag/AgCl, at 20?mV/s^?1. The sweep was stopped after 30 cycles at ?0.1?V Ag/AgCl and the working electrode was covered by homopolymer and copolymer of aniline and 2-anilinoethanol. Characterizations of the products were carried out by cyclic voltammograms, UV?Cvisible, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance (EIS) was employed to examine the water absorption of the synthesized polymers to be used in biosensor application. Electrochemical properties of polyaniline, poly(2-anilinoethanol) and poly(aniline-co-2-anilinoethanol) were studied and it is shown that with increased (2-anilinoethanol) content in the copolymer, its electroactivity, conductivity and resistance are reduced, though the processability and adhesion properties improve. The hydrophilicity of polymer film obtained has increased with increasing (2-anilinoethanol) content which leads to salt moving to the surface of steel.