高温合金脉冲电化学复合抛光实验研究 |
| |
引用本文: | 田喜明,朱红钢,张云鹏.高温合金脉冲电化学复合抛光实验研究[J].电加工,2012(4):13-16. |
| |
作者姓名: | 田喜明 朱红钢 张云鹏 |
| |
作者单位: | [1]海军装备部,陕西西安710021 [2]西安航空动力股份有限公司,陕西西安710021 [3]西北工业大学机电学院,陕西西安710072 |
| |
摘 要: | 电化学机械复合抛光是近年来发展起来的一种抛光新技术。针对粗糙表面的高效抛光问题,提出一种两阶段的电化学机械复合抛光和纯机械抛光相结合的方法。论述了脉冲电化学机械复合抛光加工的实验设备,进行了系统的工艺参数实验研究;用方差分析的方法分析了各参数对加工试件表面粗糙度影响的显著性,得出最佳的工艺参数;详细分析了不同磨头加工时各参数对表面粗糙度的影响规律。实验研究表明,利用脉冲电化学机械复合抛光的加工方法,采用各种类型的阴极工具头,可实现镜面加工。
|
关 键 词: | 脉冲电化学机械磨头抛光加工 |
Study on Pulse Electrochemical Mechanical Combined Polishing of Superalloy |
| |
Authors: | Tian Ximing Zhu Honggang Zhang Yunpeng |
| |
Affiliation: | 1. Equipment Department of the Navy,Xi'an 710021,China; 2. Xi'an Aero-Engine Co. , Ltd,Xi'an 710021,China; 3. Northwestern Polytechnical University,Xi' an 710072, China ) |
| |
Abstract: | Aiming at the problem of effective polishing for rough surface, a two stages electrochemical mechanical polishing method is proposed. The experimental equipment of pulse electrochemi- cal mechanical combined polishing is introduced, the technology rule of process parameters on surface roughness is analyzed and a set of optimized process parameters were obtained. It has been found that pulse electrochemical mechanical combined polishing is suitable for mirror machining. |
| |
Keywords: | pulse electrochemical machine polishing head polishing |
本文献已被 维普 等数据库收录! |