| 开放式数控系统在专用数控机床上的应用研究 |
| |
| 引用本文： | 王可,孙凤,付玉升,李卉.开放式数控系统在专用数控机床上的应用研究[J].组合机床与自动化加工技术,2004(12):79-80. |
| |
| 作者姓名： | 王可 孙凤 付玉升 李卉 |
| |
| 作者单位： | 沈阳工业大学,机械工程学院,辽宁,沈阳,110023 |
| |
| 摘 要： | 文章浅析了数控系统的发展趋势,探讨了基于PC机和运动控制卡为核心的开放式数控系统的结构特征,指出了相对于通用数控系统的技术优势,提出了开放式数控系统及其在专用数控机床上应用的广阔前景.文章还以专用数控螺杆加工机床为例,进一步阐述了开放式数控系统在专用数控机床上应用的各方面特性.
|
| 关 键 词： | 开放式 数控 PC机 运动控制卡 |
| 文章编号： | 1001-2265(2004)12-0079-02 |
| 修稿时间： | 2004年5月13日 |
Study on application of open-architecture numerical control system in special machine tools |
| |
| WANG Ke,SUN Feng,FU Yusheng,LI Hui.Study on application of open-architecture numerical control system in special machine tools[J].Modular Machine Tool & Automatic Manufacturing Technique,2004(12):79-80. |
| |
| Authors: | WANG Ke SUN Feng FU Yusheng LI Hui |
| |
| Affiliation: | WANG Ke SUN Feng FU Yusheng LI Hui |
| |
| Abstract: | In this paper, the trend of development on Numerical Control System is analyzed. The characteristics on structure of the Open-architecture Numerical Control System , which is the center of PC-base and the Motion Control Card are discussed. Advantages of technology comparing with traditional Numerical Control System are pointed out. The prospect of the Open-architecture Numerical Control System and application on special machine tools are brought up. And as the case of the special screw Numerical Control machine,all kinds of characteristics of application about special Numerical Control machine tools with the Open-architecture Numerical Control System are expound. |
| |
| Keywords: | open-architecture numerical control PC-base the motion control card |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
