首页 | 本学科首页   官方微博 | 高级检索  
     

TS-1催化丙酮氨氧化合成丙酮肟工艺研究
引用本文:刘明,娄风雷,王琴,马俊红.TS-1催化丙酮氨氧化合成丙酮肟工艺研究[J].化学推进剂与高分子材料,2011,9(2):67-69.
作者姓名:刘明  娄风雷  王琴  马俊红
作者单位:黎明化工研究院,河南,洛阳,471000
摘    要:以钛硅分子筛(Ts-1)为催化剂,过氧化氢和丙酮为原料,催化氨氧化合成丙酮肟.对影响合成反应的多个因素进行了考察,合成条件经正交实验优化后丙酮肟产率有了较为明显的提高.结果表明:在反应温度65℃,搅拌转速320 r/min,质量分数30%过氧化氢水溶液滴加3.5~4.5 h,催化剂用量为丙酮质量的40%,n(丙酮):n...

关 键 词:钛硅分子筛  丙酮肟  催化氨氧化  过氧化氢  正交实验

Study on Synthetic Process of Acetone Oxime Catalytic Ammoxidation by TS-1
LIU Ming,LOU Fenglei,WANG Qin,MA Junhong.Study on Synthetic Process of Acetone Oxime Catalytic Ammoxidation by TS-1[J].Chemical Propellants & Polymeric Materials,2011,9(2):67-69.
Authors:LIU Ming  LOU Fenglei  WANG Qin  MA Junhong
Affiliation:LIU Ming,LOU Fenglei,WANG Qin,MA Junhong(Liming Research Institute of Chemical Industry,Luoyang 471000,China)
Abstract:Acetone oxime was synthesized by catalytic ammoxidation using Ti-Si molecular sieve(TS-1) as catalyst,hydrogen peroxide and acetone as raw materials.Many factors affecting the synthesis reaction are studied.The yield of acetone oxime obviously increased through optimizing synthesis conditions by orthogonal experiments.The results show that the yield of acetone oxime can reach over 80% when reaction temperature is 65℃,stirring speed is 320r/min,dropping time of 30% hydrogen peroxide aqueous solution is 3.5~4.5h,catalyst mass fraction based on acetone is 40%,n(acetone):n(H2O2):n(NH3)=1:1.1: 3.5,V(water):V(isopropanol)=1:1 mixture is used as solvent.Feeding inert gas to system can decrease the side reactions,and increase the yield of acetone oxime.
Keywords:Ti-Si molecular sieve  acetone oxime  catalytic ammoxidation  hydrogen peroxide  orthogonal experiment  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号