| 微波外场对液相合成砂状氧化钇前驱体形貌的影响 |
| |
| 引用本文： | 曾青云,帅庚未,张勇,钟华生.微波外场对液相合成砂状氧化钇前驱体形貌的影响[J].江西有色金属,2014(3):28-31,75. |
| |
| 作者姓名： | 曾青云 帅庚未 张勇 钟华生 |
| |
| 作者单位： | 江西理工大学冶金与化学工程学院,江西赣州341000 |
| |
| 基金项目： | 国家高技术研究发展（863）计划（2012AA061900）;国家科技型中小企业技术创新基金（11C26113602307）;江西省自然科学基金（20122BAB206024）;江西省科技支撑计划（20132BB50005）;江西省教育厅科技落地计划（赣财教【2013】79号、[20111243号） |
| |
| 摘 要： | 在微波外场作用下,以YCl3溶液为原料、草酸为沉淀剂直接液相合成了大颗粒砂状Y2O3前驱体,采用SEM、XRD和TG-DTA对前驱体及热分解产物进行表征,考察了H2C2O4与YCl3的摩尔比、YCl3起始浓度、反应时间和反应温度等对前驱体形貌的影响.结果表明,在微波外场作用及H2C2O4与YCl3的摩尔比为2∶1、YCl3的起始浓度为0.5 mol/L、反应时间3 h和反应温度40℃液相合成条件下,可得到D50约为40μm的附聚形大颗粒砂状前驱体.
|
| 关 键 词： | 砂状 YO 微波 草酸 晶体形貌 |
Effect of microwave field on morphology of sand-shaped Y2O3 precursor synthesized under liquid phase |
| |
| ZENG Qingyun,SHUAI Gengwei,ZHANG Yong,ZHONG Huasheng.Effect of microwave field on morphology of sand-shaped Y2O3 precursor synthesized under liquid phase[J].Jiangxi Nonferrous Metals,2014(3):28-31,75. |
| |
| Authors: | ZENG Qingyun SHUAI Gengwei ZHANG Yong ZHONG Huasheng |
| |
| Affiliation: | ( School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China) |
| |
| Abstract: | Using YCl3 and oxalic acid as raw materials, the effects of microwave on morphology of synthesis Y2O3 precursor in the liquid phase are investigated. The effects of mole ratio of H 2C2O4 to YCl3, initial con-centrations of YCl3, reaction time and reaction temperature on the morphology and dispersion of precursor are examined. Techniques, such as scanning electron microscope （SEM）, X-Ray Diffraction （XRD） and TG-DTA are applied to precursors and thermal decomposition products. The results show that the large particle size and sand shape precursor with the average particle size of about 40 μm is produced under the conditions：mole ratio of H2C2O4 to YCl3 is 2：1, initial concentration of YCl3 is 0.5 mol/L, reaction temperature is 40 ℃with reaction time being 3 hrs. |
| |
| Keywords: | sand shape Y2O3 microwave oxalic acid crystal morphology |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
