| 复合管拉拔过程的计算机仿真 |
| |
| 引用本文： | 臧新良,周维海,杜凤山,温立刚.复合管拉拔过程的计算机仿真[J].重型机械,2001,1(3):56-57. |
| |
| 作者姓名： | 臧新良 周维海 杜凤山 温立刚 |
| |
| 作者单位： | 臧新良（燕山大学）
周维海（燕山大学）
杜凤山（燕山大学）
温立刚（燕山大学） |
| |
| 摘 要： | 采用弹塑性大变形有限元法建立了复合管的拉拔模型,并对整个拉拔过程进行了仿真。研究各种工艺参数对复合管拉拔拔制力的影响,计算结果与实验数据十分吻合。
|
| 关 键 词： | 复合管 复合拉拔 弹塑性有限元 计算机仿真 |
| 修稿时间： | 2001年1月10日 |
Computer simulation of
clad steel pipe during compound drawing |
| |
| Zang Xinliang et al.Computer simulation of
clad steel pipe during compound drawing[J].Heavy Machinery,2001,1(3):56-57. |
| |
| Authors: | Zang Xinliang |
| |
| Abstract: | The model of clad steel pipe during compound drawing forming was established with the aid of elastic plastic FEM.the forming process is simulated for studying the influence of the technological parameters upon the drawing force of the compound drawing forming.The comparison between measured values and computer simulation results show comprehensive coincidence each other. |
| |
| Keywords: | clad steel pipe compound drawing elastic plastic finite element computer simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
