| 射孔弹聚能射流侵彻钢靶的数值仿真与实验分析 |
| |
| 引用本文： | 吴焕龙,杜明章,杨超,王庆兵.射孔弹聚能射流侵彻钢靶的数值仿真与实验分析[J].爆破器材,2012,41(2):30-33. |
| |
| 作者姓名： | 吴焕龙 杜明章 杨超 王庆兵 |
| |
| 作者单位： | 四川石油射孔器材有限责任公司 四川内江 642177;中国石油大学(华东)机电工程学院 山东青岛 266555 |
| |
| 摘 要： | 应用ANSYS/LS-DYNA3D显式非线性有限元软件,采用ALE多物质算法对某型石油射孔弹装药结构下聚能射流形成、侵彻钢靶过程进行了数值模拟及分析,并与实验数据作了对比。结果表明,数值仿真与实验结果均值间的穿深误差为8.31%,孔径误差为15.16%,这完全满足设计需要,为今后数值计算在射孔弹装药结构优化设计方面的应用提供了参考依据。
|
| 关 键 词： | 石油射孔弹 聚能射流 侵彻 数值模拟 结构优化 |
Numerical Simulation and Experimental Analysis of Shaped Charge Jet Penetrating into Steel Target |
| |
| WU Huanlong
,
DU Mingzhang
,
YANG Chao
,
WANG Qingbing.Numerical Simulation and Experimental Analysis of Shaped Charge Jet Penetrating into Steel Target[J].Explosive Materials,2012,41(2):30-33. |
| |
| Authors: | WU Huanlong DU Mingzhang YANG Chao WANG Qingbing |
| |
| Affiliation: | WU Huanlong, DU Mingzhang, YANG Chao, WANG Qinghing (Sichuan Petroleum Perforating Appliances Co. , Ltd. (Sichuan Neijiang, 642177) CoUege of Mechanical and Electronic Engineering, China University of Petroleum (Shandong Qingdao, 266555) |
| |
| Abstract: | Based on the three-dimensional explicit nonlinear FEM software ANSYS/LS-DYNA3D, the numerical simulation and analysis were conducted for the process of a kind of shaped charge jet formation and penetrating steel target with the ALE method. Contrast analysis was made between the simulation results and experiment data. The results show the relative computational error from average experimental data is 8.31% in penetration depth, 15.16% in perforation diameter, which fully satisfied the design requirements. The simulation results could provide design reference for the application of numerical simulation calculation in future optimum design of shaped charge structure. |
| |
| Keywords: | petroleum shaped charge jet penetration numerical simulation structure optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
