| 不同阵列PBGA器件焊点可靠性分析 |
| |
| 引用本文： | 戴玮,薛松柏,张亮,盛重.不同阵列PBGA器件焊点可靠性分析[J].焊接学报,2009,30(9):73-76. |
| |
| 作者姓名： | 戴玮 薛松柏 张亮 盛重 |
| |
| 作者单位： | 南京航空航天大学,材料科学与技术学院,南京,210016 |
| |
| 基金项目： | 南京航空航天大学博士学位论文创新与创优基金，江苏省"六大人才高峰"基金，江苏省普通高校研究生科技创新计划基金 |
| |
| 摘 要： | 采用Anand模型描述钎料本构关系,对温度循环载荷下两种不同阵列形式的塑料球栅阵列(PBGA)Sn3.0Ag0.5Cu焊点的应力应变响应进行有限元分析.结果表明,两种不同阵列条件下,关键焊点的位置均由芯片拐角位置决定.芯片尺寸改变时,PB.GAl21焊点的最大应力值随芯片尺寸的增大而增大,但PBGA81的最大应力值随芯片尺寸增大先减小后增大.凭借Engelmaier修正的Coffin-Manson寿命预测方程,分别预测了两种不同阵列PBGA器件四种芯片尺寸条件下焊点的热疲劳寿命,结果表明芯片尺寸对焊点疲劳寿命有较大影响.
|
| 关 键 词： | 塑料球栅阵列 阵列形式 芯片尺寸 疲劳寿命 |
| 收稿时间： | 2009/5/11 0:00:00 |
Analysis on soldered joint reliability of PBGA package with different arrangement models |
| |
| DAI Wei,XUE Songbai,ZHANG Liang and SHENG Zhong.Analysis on soldered joint reliability of PBGA package with different arrangement models[J].Transactions of The China Welding Institution,2009,30(9):73-76. |
| |
| Authors: | DAI Wei XUE Songbai ZHANG Liang and SHENG Zhong |
| |
| Affiliation: | College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China,College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China,College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China and College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | Finite element analysis was used to investigate the stress distribution of PBGA soldered joints with different arrangement models, and the constitutive relationship of Sn3.0Ag0.5Cu lead-free solder was described by Anand model.The results indicate that the positions of critical soldered joints are determined by the chip corner.The maximum stress of PBGA121 soldered joints increases when chip size increases, while the maximum stress of PBGA81 soldered joints decreases first and then increases.Based on the modified Manson-Coffin model by Engelmaier, the fatigue lives of critical soldered joints conditions corresponding to four different chip sizes were predicted, and it is found that the size of Silicon chip has a significant effect on the fatigue life of soldered joints. |
| |
| Keywords: | plastic ball grid array arrangement model chip size fatigue life |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
