| 卡尔多炉处理废杂铜技术 |
| |
| 引用本文： | 朱烨,刘万灵.卡尔多炉处理废杂铜技术[J].有色金属,2000,52(1):72-74. |
| |
| 作者姓名： | 朱烨 刘万灵 |
| |
| 作者单位： | 波立登工程有限公司北京代表处,北京,100037 |
| |
| 摘 要： | 用卡尔多炉技术处理放心杂铜生产粗铜或铜合金，铜品位从３０％～７０％，氏于０．５％，上作业周期少于６小时，经济上有利可图。记子结构紧奠，可以整体封闭防止逸散。全部过程均在控制室遥控进行，故劳动条件和环保效果都非常好，该技术已被全球多家冶炼厂选用。
|
| 关 键 词： | 炼铜 卡尔多炉 废杂铜 环境保护 |
| 文章编号： | 1001-0211(2000)01-0072-03 |
| 修稿时间： | 1999年5月24日 |
KALDO TECHNOLOGY FOR COPPER SCRAP TREATMENT |
| |
| ZHU Ye,LIU Wanlin.KALDO TECHNOLOGY FOR COPPER SCRAP TREATMENT[J].Nonferrous Metals,2000,52(1):72-74. |
| |
| Authors: | ZHU Ye LIU Wanlin |
| |
| Abstract: | The Kaldo Process is a profitable technology to use low grade copper scrap to produce blister copper (or gun metal). The copper grade can be from 30%-70%. The copper in an inert slag will be less than 0.5%. The total Cycle time from tap to tap is less than 6 hours. The furnace is compact and can be totally enclosed to prevent stray emissions. The whole operation is performed with remote control from a control room. So both of environment and working condition are very good. This technology has been used in several smelters worldwide. |
| |
| Keywords: | Kaldo technology copper scrap blister copper environment protection copper smelting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
