| 塑料水杯盖注塑模具设计 |
| |
| 引用本文： | 李润娟,张艳霞.塑料水杯盖注塑模具设计[J].机械研究与应用,2014(2):139-140. |
| |
| 作者姓名： | 李润娟 张艳霞 |
| |
| 作者单位： | 河南广播电视大学,河南郑州450008 |
| |
| 摘 要： | 利用UG软件对塑料水杯盖进行了产品的三维造型，在对塑件结构工艺性分析的基础上，进行了浇口位置和分型面的选择，型芯、型腔、模具等结构的设计，设计过程中采用了大量计算机辅助模具设计，缩短了开发周期，降低了生产成本。
|
| 关 键 词： | UG 塑料 注塑模具 计算机辅助设计 |
Development of Injection Mold for Plastic Cup Cover |
| |
| LI Run-juan,ZHANG Yan-xia.Development of Injection Mold for Plastic Cup Cover[J].Mechanical Research & Application,2014(2):139-140. |
| |
| Authors: | LI Run-juan ZHANG Yan-xia |
| |
| Affiliation: | (Henan Radio ＆ TV University, Zhengzhou Henan 450008, China) |
| |
| Abstract: | The 3D shape of the plastic cup cover is generated by the software UG.Based on the analysis of the structure process of the plastic parts, The gate location and the mould joint are selected,the core and cavity of the mould structure are designed.A large number of computer aided design is used in the course of design, which shorts the development cycle and reduces production cost. |
| |
| Keywords: | UG plastic injection mold design computer-aided design |
| 本文献已被 维普 等数据库收录！ |
