| 高铬铸铁自保护堆焊药芯焊丝的研制 |
| |
| 引用本文： | 肖逸锋,张清辉.高铬铸铁自保护堆焊药芯焊丝的研制[J].中国机械工程,2006(Z2). |
| |
| 作者姓名： | 肖逸锋 张清辉 |
| |
| 作者单位： | 湘潭大学，湘潭大学 湘潭，411105，湘潭，411105 |
| |
| 基金项目： | 湖南省教育厅资助项目(05C085)，湖南省科技厅资助项目 |
| |
| 摘 要： | 研制了一种新型高铬铸铁堆焊药芯焊丝,其单道单层堆焊室温硬度为HRC48左右,便于切削加工,焊道层金属具有良好的抗裂性。该焊丝的最大特点是堆焊时采用普通埋弧焊机,不需加入任何保护气体和焊剂即能顺利进行堆焊,节省了保护气体或焊剂,简化了操作过程。介绍了焊丝设计原理及堆焊层金属的有关性能。
|
| 关 键 词： | 高铬铸铁 堆焊 自保护 药芯焊丝 |
Development of Self-shielded Surfacing Flux-cored Wire with High Chromium Cast Iron System |
| |
| Xiao Yifeng Zhang Qinghu Xiangtan University,Xiangtan,Hunan.Development of Self-shielded Surfacing Flux-cored Wire with High Chromium Cast Iron System[J].China Mechanical Engineering,2006(Z2). |
| |
| Authors: | Xiao Yifeng Zhang Qinghu Xiangtan University Xiangtan Hunan |
| |
| Affiliation: | Xiao Yifeng Zhang Qinghu Xiangtan University,Xiangtan,Hunan,411105 |
| |
| Abstract: | A new type of flux-cored wire with high chromium cast iron system for surfacing was investigated.The results show that the deposited layer of this wire possesses good machinability for the reason of relative low hardness at about HRC48 in as-welded with one bead and one layer surfa- cing.Also,this wire has good crack resistance.The most peculiarity of this wire is that the total cost is low for it can choose ordinary submerged arc welding and without use any shielded gas and flux dur- ing surfacing.The design principles and concrete properties of this wire were also expatiated. |
| |
| Keywords: | high chromium cast iron surfacing self-shielded flux-cored wire |
| 本文献已被 CNKI 等数据库收录！ |
