| 限形压具在薄壁件锥盘中的应用 |
| |
| 引用本文： | 王晓兰. 限形压具在薄壁件锥盘中的应用[J]. 内燃机, 2007, 0(5): 26-27 |
| |
| 作者姓名： | 王晓兰 |
| |
| 作者单位： | 内江峨柴鸿翔机械有限公司,四川,内江,641000 |
| |
| 摘 要： | 研究锥盘淬火变形的原因，改进设计限形淬火压具，使薄壁件锥盘的淬火变形报废率由25％下降到5％以下，经济效益和社会效益十分显著。
|
| 关 键 词： | 限形压具 薄壁件锥盘 淬火报废率 |
| 文章编号： | 1000-6494（2007）05-0026-02 |
| 修稿时间： | 2007-05-14 |
Application of limited Form Pressing Jig in Thin Wall Conical Plate |
| |
| WANG Xiao-lan. Application of limited Form Pressing Jig in Thin Wall Conical Plate[J]. Internal Combustion Engines, 2007, 0(5): 26-27 |
| |
| Authors: | WANG Xiao-lan |
| |
| Abstract: | The paper researches the reasons for conical plate distortion and improves the design of limited form pressing jig to reduce the failure rate from 25% to 5% below. It is very prominent in economic and social benefit. |
| |
| Keywords: | limited form pressing jig thin wall conical plate quenching failure rate |
| 本文献已被 维普 万方数据 等数据库收录！ |
