| 高频脉冲电沉积镍-钴合金镀层的耐蚀性 |
| |
| 引用本文： | 梁燕,许韵华,范爽,郑福才,曾一珂,李岑.高频脉冲电沉积镍-钴合金镀层的耐蚀性[J].电镀与精饰,2009,31(9). |
| |
| 作者姓名： | 梁燕 许韵华 范爽 郑福才 曾一珂 李岑 |
| |
| 作者单位： | 1. 北京交通大学,理学院,北京,100044
2. 北京大学,机电学院,北京,100044 |
| |
| 基金项目： | 国家重点基础研究发展规划项目 |
| |
| 摘 要： | 用电化学的方法研究了高频脉冲电镀镍钴复合镀层在NaOH溶液中的耐蚀性,采用扫描电镜观察了碱蚀前后镍-钴合金镀层的表面形貌,并测定了镀层在NaOH溶液中的极化曲线.结果表明:随着频率的增加,沉积速率提高,沉积层表面更加致密、均匀,在10%NaOH溶液中镍-钴合金镀层的腐蚀质量损失明显减小,腐蚀速率变慢;高频和直流电镀镍-钴合金镀层的极化曲线形状相似,高频脉冲电镀相比于直流电镀,更能提高镀层的耐腐蚀性.高频率对沉积层的细化可能有重要影响,并使镀层的耐蚀性提高.
|
| 关 键 词： | 高频脉冲电镀 镍-钴合金 复合镀层 耐蚀性 |
Study on Corrosion Resistance of High Frequency Pulse Electrodeposited Ni-Co Alloy |
| |
| LIANG Yan,XU Yun-hua,FAN Shuang,ZHENG Fu-cai,ZENG Yi-ke,LI Cen.Study on Corrosion Resistance of High Frequency Pulse Electrodeposited Ni-Co Alloy[J].Plating & Finishing,2009,31(9). |
| |
| Authors: | LIANG Yan XU Yun-hua FAN Shuang ZHENG Fu-cai ZENG Yi-ke LI Cen |
| |
| Affiliation: | LIANG Yan1,XU Yun-hua1,FAN Shuang1,ZHENG Fu-cai1,ZENG Yi-ke1,LI Cen2(1.School of Science,Beijing Jiaotong University,Beijing 100044,China,2.School of Mechanical and Electronic Control Engineering,China) |
| |
| Abstract: | The corrosion resistance of high frequency pulse electrodeposited Ni-Co alloy in 10% NaOH solution was studied.Morphologies of the Ni-Co alloy deposits were examined by SEM before and after alkaline etching.Anodic polarization curves of the deposits in NaOH solution were measured.The results indicate that with the frequency increasing,the depositing rates increase,the coatings tend to be more compact and the weight loss rates of the coatings in 10% NaOH solution decrease;The anodic polarization curves of th... |
| |
| Keywords: | high frequency pulse electroplating Ni-Co alloy composite coating corrosion resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
