| 柱塞Co基粉末激光熔覆工艺研究 |
| |
| 引用本文： | 张兴泉,王云山,雷剑波,刘亚军,杨洗陈.柱塞Co基粉末激光熔覆工艺研究[J].应用激光,2006,26(2):78-80. |
| |
| 作者姓名： | 张兴泉 王云山 雷剑波 刘亚军 杨洗陈 |
| |
| 作者单位： | 天津工业大学激光工程中心,天津,300160 |
| |
| 摘 要： | 为增强1Cr18Ni9Ti不锈钢零件的硬度及耐磨性,采用激光熔覆技术在其表面制备Co基合金熔覆层。利用光学显微镜,分析了熔覆层的微观组织;应用显微硬度计测试了熔覆层的硬度;应用浓度为2%的硝酸溶液做腐蚀剂,测试了熔覆层的耐腐蚀性。并与等离子热喷涂、Ni基合金熔覆等其它表面改性技术进行比较,结果表明:1Cr18Ni9Ti不锈钢柱塞Co基合金激光熔覆层硬度达到HV520,具有较好的耐磨性,其抗酸腐蚀性能也达到检验标准要求。
|
| 关 键 词： | 激光熔覆 Co基合金粉末 耐酸腐蚀性 耐磨性 |
| 收稿时间： | 2005/12/20 |
| 修稿时间： | 2005年12月20 |
Study on Co alloy laser cladding processing on Plunger |
| |
| Zhang Xingquan,Wang Yunshan,Lei Jianbo,Liu Yajun,Yang Xichen.Study on Co alloy laser cladding processing on Plunger[J].Applied Laser,2006,26(2):78-80. |
| |
| Authors: | Zhang Xingquan Wang Yunshan Lei Jianbo Liu Yajun Yang Xichen |
| |
| Abstract: | In order to improve the hardness and wear resistant property of 1Cr18Ni9Ti stainless steel part,laser cladding of Co alloy layer on stainless steel substrate was carried out.The microstructure of laser cladding layer was analyzed by means of optical microscope,the microhardness of laser cladding layer was measured by using microhardness meter and the wear resistant property of laser cladding layer was measured by nitric acid of 2%.By contrast with spray coating and Ni alloy laser cladding,the results shown that the hardness of laser cladding layer can get to HV520,the wear resistant property of laser cladding layer was better and the corrode resistant property can accord with the test standard by laser surface coating with Co alloy. |
| |
| Keywords: | laser cladding power of Co alloy acid-resistant property wear resistant property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
