跟随误差报警阈值的动态计算 |
| |
引用本文: | 邓合,周会成,陶杰.跟随误差报警阈值的动态计算[J].机床与液压,2016,44(7):33-35. |
| |
作者姓名: | 邓合 周会成 陶杰 |
| |
作者单位: | 华中科技大学国家数控系统工程技术研发中心,湖北武汉,430074 |
| |
基金项目: | 国家科技重大专项(2012ZX04004-022 |
| |
摘 要: | 利用正交实验方法,对影响跟随误差大小的因素进行优先排序,找出关键影响因素;通过实验,分析并得出关键影响因素与跟随误差之间的关系,利用此关系提出一种跟随误差报警阈值的动态计算方法,能根据进给速度实时的计算跟随误差报警阈值。与国产数控系统中传统的以静态参数设置跟随误差报警阈值相比,该方法能减少误报次数,保证数控加工精度。
|
关 键 词: | 正交试验 动态计算 报警阈值 |
Dynamic Calculation for Tracking Error Alarm Threshold |
| |
Abstract: | Prioritization the factors was made which affected the value of tracking error using the orthogonal test, and the key fac-tors were found.The relationship between key factors and tracking error was analyzed through test, and a dynamic calculation method for tracking error alarm threshold was raised using the relationship, which could calculate the alarm threshold according to the feed speed in real-time.As compared with the traditional method which used static parameters to set tracking error alarm threshold in domes-tic numercial control ( NC) system, it can reduce the number of false alarm and assure the NC machining accuracy. |
| |
Keywords: | Orthogonal test Dynamic calculation Alarm threshold |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|