首页 | 本学科首页   官方微博 | 高级检索  
     

断路器选相合闸装置现场参数整定及测试方法
引用本文:肖俊先,董国琴,王珂,王子奕,李林山,牟秀君.断路器选相合闸装置现场参数整定及测试方法[J].湖南电力,2021,41(1):60-63,70.
作者姓名:肖俊先  董国琴  王珂  王子奕  李林山  牟秀君
作者单位:湖南省湘电试验研究院有限公司,湖南长沙410004;湖南省湘电试验研究院有限公司,湖南长沙410004;国网湖南省电力有限公司电力科学研究院,湖南长沙410007;湖南省湘电试验研究院有限公司,湖南长沙410004;湖南省湘电试验研究院有限公司,湖南长沙410004;湖南省湘电试验研究院有限公司,湖南长沙410004
摘    要:介绍了断路器选相合闸装置的基本原理、时间参数整定原则,分析了容性负载及感性负载的理想合闸时刻及控制时序。在此基础上,提出了利用继电保护测试仪进行断路器关合时间测试的方法及利用继电保护测试仪输出电压与开关位置、选相合闸装置、故障录波装置相结合的选相合闸性能测试方法。通过工程实例验证了试验方法的可行性及有效性。

关 键 词:断路器  选相合闸  理想合闸时刻  控制时序  试验方法

Field Parameter Setting and Test Method of Phase Selection and Closing Device of Circuit Breaker
XIAO Junxian,DONG Guoqing,WANG Ke,WANG Ziyi,LI Linshan,MOU Xiujun.Field Parameter Setting and Test Method of Phase Selection and Closing Device of Circuit Breaker[J].Hunan Electric Power,2021,41(1):60-63,70.
Authors:XIAO Junxian  DONG Guoqing  WANG Ke  WANG Ziyi  LI Linshan  MOU Xiujun
Affiliation:(Hunan Xiangdian Test and Research Institute Co.,Ltd.,Changsha 410004,China;State Grid Hunan Electric Power Company Limited Research Institute,Changsha 410007,China)
Abstract:The basic principle and time parameter setting principle of the phase-selection closing device of circuit breaker are introduced.The ideal closing time and control sequence of capacitive load and inductive load are analyzed.On this basis,the method of circuit breaker closing time test by relay protection tester and the method of circuit breaker closing performance test by combining the output voltage of relay protection tester with switch position,phase selection closing device and fault recording device are put forward.The feasibility and effectiveness of the test method are verified by an engineering example.
Keywords:circuit breaker  phase selection closing device  ideal closing time  control sequence  test method
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号