| 车用层压复合座套面料施胶工艺研究 |
| |
| 引用本文： | 强盛,郭嫣,陈琳,张北波,钱现,薛涛,崔威威. 车用层压复合座套面料施胶工艺研究[J]. 纺织科技进展, 2021, 0(4): 23-25,57 |
| |
| 作者姓名： | 强盛 郭嫣 陈琳 张北波 钱现 薛涛 崔威威 |
| |
| 作者单位： | 西安工程大学纺织科学与工程学院,陕西西安710048;陕西省纺织科学研究院,陕西西安710038;四川省纺织科学研究院,四川成都610072 |
| |
| 基金项目： | 2020年陕西省科技厅工业领域重点研发项目(2020GY-267);中国纺织联合会指导性项目(2018061)。 |
| |
| 摘 要： | 将3种不同性能的织物运用层压复合工艺黏结在一起,使其具备多种功能.采用单因素分析法研究了不同因素下层压织物的性能,得出最优的层压工艺为温度150℃,时间80 s,压力2.0 N/cm2,TPU热熔胶粉30 g/m2和20 g/m2,交联剂KH550浓度2％,浆点法上胶,浆点距离4 mm.结果 表明这种新型织物的各项性能...
|
| 关 键 词： | 层压复合 黏结 性能 汽车座套 |
Study on Sizing Technology of Laminated Composite Seat Cover for Vehicle |
| |
| QIANG Sheng,GUO Yan,CHEN Li,ZHANG Bei-bo,QIAN Xian,XUE Tao,CUI Wei wei. Study on Sizing Technology of Laminated Composite Seat Cover for Vehicle[J]. Progress in Textile Science & Technology, 2021, 0(4): 23-25,57 |
| |
| Authors: | QIANG Sheng GUO Yan CHEN Li ZHANG Bei-bo QIAN Xian XUE Tao CUI Wei wei |
| |
| Affiliation: | (School of Textile Science and Engineering,Xi'an Polytechnic University,Xi'an 710048,China;Shaanxi Textile Science Institute.Xi'an 710038,China;Sichuan Textile Scientific Research Institute,Chengdu 610072,China) |
| |
| Abstract: | Three kinds of fabrics with different properties were bonded together by laminating composite technology,which made them have many functions.The properties of the fabric under different factors were studied by single factor analysis.The results showed that the optimal process was as follows:laminating temperature 150℃,the laminating time 80 s,the laminating pressure2.0 N/cm2,the TPU hot melt adhesive powder 30 g/m2 and 20 g/m2,the cross linker KH550 concentration 2%,gluing by slurry point method,and the slurry point distance was 4 mm.The results showed that the new fabric had excellent properties and could meet the requirements of automobile seat cover textiles. |
| |
| Keywords: | laminated composite bonding performance car seat cover |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
