|
|||||
|
|
| 1.20%铝冷轧TRIP钢的合金设计、工艺和力学性能 | |
| 引用本文： | 李忠义,张建,柳得橹,娄艳芝,刘学华.1.20%铝冷轧TRIP钢的合金设计、工艺和力学性能[J].钢铁,2010,45(2). |
| 作者姓名： | 李忠义 张建 柳得橹 娄艳芝 刘学华 |
| 作者单位： | 1. 马鞍山钢铁股份有限公司技术中心,安徽,马鞍山,243000;北京科技大学材料科学与工程学院,北京,100083 2. 马鞍山钢铁股份有限公司技术中心,安徽,马鞍山,243000 3. 北京科技大学材料科学与工程学院,北京,100083 |
| 摘 要： | 报道了含1.2%Al-0.1%C-Mn-Si冷轧TRIP600钢带的研究开发结果,通过合金设计、冶炼、热轧、冷轧和热处理在实验室成功地制备了TRIP600钢带,其屈服强度为390~420 MPa、抗拉强度650~700 MPa,伸长率30.5%~37.5%,强塑积21000~26000 MPa.%。作为热处理工艺设计的基础,通过Thermo-Calc软件计算了试验钢的相图、相组成、贝氏体转变TTT曲线和T0温度线。含质量分数为1.20%铝的冷轧TRIP600的成分设计和工艺参数可以作为工业试生产TRIP600的基础。 |
| 关 键 词： | 冷轧TRIP钢 含铝钢 残余奥氏体 组织与性能 |
Design,Processing and Mechanical Properties of Cold Rolled TRIP Steel Bearing 1.20% Aluminum |
|
| LI Zhong-yi,ZHANG Jian,LIU De-lu,LOU Yan-zhi,LIU Xue-hua.Design,Processing and Mechanical Properties of Cold Rolled TRIP Steel Bearing 1.20% Aluminum[J].Iron & Steel,2010,45(2). | |
| Authors: | LI Zhong-yi ZHANG Jian LIU De-lu LOU Yan-zhi LIU Xue-hua |
| Affiliation: | LI Zhong-yi1,2,ZHANG Jian1,LIU De-lu2,LOU Yan-zhi2,LIU Xue-hua1 |
| Abstract: | TRIP-600 steel containing 1.2%Al was reserched on a laboratory scale.The phase diagrams,TTT curves and T0 lines of bainite formation in the steel were calculated with Thermo-Calc.The TRIP600 strips were successfully prepared through a designed process including steel-making,hot and cold rolling as well as heat treatments.Tensile strength 650-700 MPa,yield strength 390-420 MPa and total elongation 30.5%-37.5% is obtained for the steel strips.The chemical compositions and processing parameters can be referred... |
| Keywords: | cold rolled TRIP steel Al bearing steel retained austenite microstructure and property |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |