| 改善碳化钨颗粒与高铬铸铁界面结合的效果与机理 |
| |
| 引用本文： | 许斌.改善碳化钨颗粒与高铬铸铁界面结合的效果与机理[J].热加工工艺,2002(1):9-11. |
| |
| 作者姓名： | 许斌 |
| |
| 作者单位： | 山东建筑工程学院,材料科学与工程系,山东,济南,250014 |
| |
| 基金项目： | 山东省教育厅资助 (J96A54) |
| |
| 摘 要： | 利用 H- 80 0透射电镜、WE- 10型万能拉伸试验机和 MM- 2 0 0型磨损试验机研究了碳化钨颗粒与高铬铸铁的界面结合问题 ,并对去除碳化钨颗粒表面的氧化膜和造渣过程进行了热力学计算。结果表明 ,由于 Si- Ca合金对于 WC颗粒表面稳定氧化膜 WO3 的还原造渣作用 ,改善了 WC颗粒与高铬铸铁的界面结合 ;当 WC含量为 2 0 %时 ,WC颗粒与高铬铸铁的界面结合最佳
|
| 关 键 词： | 熔覆铸造 碳化钨颗粒 高铬铸铁 界面 |
| 文章编号： | 1001-3814(2002)01-0009-03 |
Interface-Connecting between WC Particles and High Chrome Cast Iron and Its Mechanism |
| |
| XU Bin.Interface-Connecting between WC Particles and High Chrome Cast Iron and Its Mechanism[J].Hot Working Technology,2002(1):9-11. |
| |
| Authors: | XU Bin |
| |
| Abstract: | The interface connecting between WC particles and high chrome cast iron was studied by using H 800 TEM, WE 10 and MM 200 testers, and the courses of removing WO 3 film on the WC particles and conducting the slag were analyzed with the help of thermodynamic calculations. The results showed that stable WO 3 film can be removed by Si Ca alloy because of its disoxidation and slagging, leading to excellent interface connecting between WC particles and high chrome cast iron, and that the interface connecting is best when 20%WC(Wt.%). |
| |
| Keywords: | cast in place surface alloying WC particles high chrome cast iron interface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
