| 基于UG的三环减速器运动仿真与啮合分析 |
| |
| 引用本文： | 曹争光,黄勤,黄正胜.基于UG的三环减速器运动仿真与啮合分析[J].煤矿机械,2010,31(2). |
| |
| 作者姓名： | 曹争光 黄勤 黄正胜 |
| |
| 作者单位： | 1. 贵州大学机械工程学院,贵阳,550003
2. 合肥水泥研究设计院,合肥,230001 |
| |
| 基金项目： | 贵州省科技厅2008年度工业攻关计划项目(2008.3031) |
| |
| 摘 要： | 介绍UGNX6.0运动仿真模块下的三环减速器运动仿真的方法,并在仿真情况下分析其啮合状况,运动仿真可以检查干涉并用于指导设计,验证设计的合理性,证实了三环减速器具有多齿啮合效应和较强的过载能力。为三环减速器的设计、分析与优化提供依据。
|
| 关 键 词： | 三环减速器 运动仿真 多齿啮合效应 |
Research of Three-ring Reducer Motion Simulation and Meshing Base on UG |
| |
| CAO Zheng-guang,HUANG Qin,HUANG Zheng-sheng.Research of Three-ring Reducer Motion Simulation and Meshing Base on UG[J].Coal Mine Machinery,2010,31(2). |
| |
| Authors: | CAO Zheng-guang HUANG Qin HUANG Zheng-sheng |
| |
| Affiliation: | 1.Mechanical Engineering College of Guizhou University/a>;Guiyang 550003/a>;China/a>;2.Hefei Cement Research and Design Institute/a>;Hefei 230001/a>;China |
| |
| Abstract: | The method of the motion simulation is introduced under the environment of UGNX6.0,and the meshing condition of three-ring reducer was researched base on motion simulation.The motion simulation is used to check interference and guide the design,to verify the reasonableness of the design.The multi-tooth meshing effect and strong overload capacity of three-ring reducer were confirmed.Those provide the basis for three-ring reducer’s design,analysis and optimization. |
| |
| Keywords: | three-ring reducer motion simulation multi-tooth meshing effect |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
