| Abstract: | ![]()
The structure formation processes that occur during the flow of dilute blends of high density polyethylene (HDPE) or polypropylene (PP) In a linear low density polyethylene (LLDPE) carrier phase have been studied. Due to low surface tensions, high deformations of the dispersed minor phase can be induced under slow flow conditions leading to the formation of slender filaments. Measurements on a slit die, having a large, converging flow entrance region, demonstrate that the mechanism for filament formation is droplet bursting, yielding growing tails during shear flow, or, unsteady drop elongation during extensional flow. Tail growth can be modeled as the flow of a slightly tapering cylinder in a fluid of different viscosity, For dispersed to carrier phase viscosity ratios greater than unity, extensional flow occurs in the tail phase, which can induce oriented crystallization. For ratios less than unity, the flow is compressive, which. Inhibits crystallization. Drop deformation and crystallization in the converging flow entrance region is greatly enhanced by the extensional flow, and droplet growth can be described by a model assuming a time-dependent, planar, extensional flow field. Data for birefringence and melting points of as-crystallized fibers are also presented and discussed. |
