| 基于ANSYS/LS-DYNA平行分度凸轮机构的应力分析 |
| |
| 引用本文： | 何晶昌,贺国军.基于ANSYS/LS-DYNA平行分度凸轮机构的应力分析[J].机械传动,2009,33(6). |
| |
| 作者姓名： | 何晶昌 贺国军 |
| |
| 作者单位： | 重庆三峡学院,重庆,404000 |
| |
| 基金项目： | 重庆市教育委员会科学技术研究项目资助(KJ081104)重庆三峡学院科技项目资助 |
| |
| 摘 要： | 介绍了平行分度凸轮机构的载荷计算方法,用ANSYS/LS-DYNA的*vread命令读取由VB产生的平行分度凸轮轮廓曲线数据,建立了平行分度凸轮机构的有限元分析模型,对平行分度凸轮机构在分度期的应力进行了仿真,确定了它的最大应力状态和最大应力.
|
| 关 键 词： | 平行分度凸轮 APDL参数建模 应力分析 |
Stress Analysis on the Parallel Conjugate Cam Mechanism based on ANSYS/LS-DINA |
| |
| He Jingchang,He Guojun.Stress Analysis on the Parallel Conjugate Cam Mechanism based on ANSYS/LS-DINA[J].Journal of Mechanical Transmission,2009,33(6). |
| |
| Authors: | He Jingchang He Guojun |
| |
| Abstract: | The load calculation method of the parallel conjugate cam mechanism is introduced. By getting data of the profile curve in parallel conjugate cam from VB, Finite element model of the parallel conjugate cam mechanism is established correctly with ANSYS/LS-DYNA. The stress state of the parallel conjugate cam mechanism is simulated during indexing, the maximum stress state and maximum stress is found out during indexing. |
| |
| Keywords: | Parallel conjugate cam APDL modeling Stress analysis |
| 本文献已被 万方数据 等数据库收录！ |
|
