| 基于无衍射光的轴承孔位姿测量系统与光路分析 |
| |
| 引用本文： | 张新宝,聂博强,黄启龙.基于无衍射光的轴承孔位姿测量系统与光路分析[J].湖北工业大学学报,2014(5):11-13,38. |
| |
| 作者姓名： | 张新宝 聂博强 黄启龙 |
| |
| 作者单位： | 华中科技大学机械与工程学院,湖北 武汉,430074 |
| |
| 摘 要： | 设计出一套以无衍射光为基准的轴承孔位姿测量系统，以便对轴承孔的位姿进行测量，详细阐述了该系统的工作原理与设计方案，并通过ZEMAX软件对光路进行仿真与优化，并对其像差进行了详细分析。
|
| 关 键 词： | 合理校中 轴承孔 位姿检测 像差分析 |
The Light Path Analysis and System Design of Bearing Hole Pose Measurement System Based on the Non-diffraction Beam |
| |
| ZHANG Xinbao,NIE Boqiang,HUANG Qilong.The Light Path Analysis and System Design of Bearing Hole Pose Measurement System Based on the Non-diffraction Beam[J].Journal of Hubei University of Technology,2014(5):11-13,38. |
| |
| Authors: | ZHANG Xinbao NIE Boqiang HUANG Qilong |
| |
| Affiliation: | ZHANG Xinbao;NIE Boqiang;HUANG Qilong;School of Mechanical Engin.,Huazhong Univ.of Sci.and Tech.; |
| |
| Abstract: | In propulsion shaft system,the spindle is supported by the bearing hole of sliding bearing,so the measurement of the pose of the bearing hole is very important based on shafting alignment technology of curve.The bearing hole pose measurement system based on the non-diffraction beam is presented in this paper.The principle and design method are then elaborated in details.The simulation and optimization of the light path has been done and aberration has also been analyzed. |
| |
| Keywords: | alignment bearing hole pose measurement aberration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
