| 蓄热室格子体设计与助燃空气预热温度计算 |
| |
| 引用本文： | 唐福恒,赵世博,盛利军.蓄热室格子体设计与助燃空气预热温度计算[J].玻璃,2014(10):6-13. |
| |
| 作者姓名： | 唐福恒 赵世博 盛利军 |
| |
| 作者单位： | 1. 北京长城工业炉技术中心 北京市 102208
2. 秦皇岛玻璃工业研究设计院 秦皇岛市 066000 |
| |
| 摘 要： | 介绍了玻璃熔窑蓄热室格子体设计的传统做法和新做法。传统做法是根据熔化区面积或单位助燃空气量，来确定格子体的换热面积或体积。新做法是以助燃空气要达到的预热温度来确定格子体的换热面积。给出了助燃空气预热温度计算的经验公式，用实例给出了格子体设计计算过程和助燃空气的预热温度计算结果。
|
| 关 键 词： | 蓄热室 格子体 换热面积 预热温度 玻璃熔窑 |
Design of Regenerative Checker-work and Calculation of Preheating Temperature of Combustion Air |
| |
| Tang Fuheng,Zhao Shibo,Sheng Lijun.Design of Regenerative Checker-work and Calculation of Preheating Temperature of Combustion Air[J].Class,2014(10):6-13. |
| |
| Authors: | Tang Fuheng Zhao Shibo Sheng Lijun |
| |
| Affiliation: | Tang Fuheng,Zhao Shibo,Sheng Lijun(1. Technology center of Beijing great-wall industrial furnace, Beijing, 102208 2. Qinhuangdao glass industry research and design institute, Qinhuangdao , 06600 ) |
| |
| Abstract: | Conventional and new design of regenerative checker-work in glass furnace were compared . The heat exchange area or volume of the checker-work are determined by melting area or unit volume of combustion air in conventional method , while the heat exchange area of checker-work is fixed by preheating temperature with combustion air in new method . The empirical equation is deduced for calculating preheating temperature with combustion air . Computational process during design of checker-work and results of preheating temperature are listed . |
| |
| Keywords: | regenerator checker-work heat exchange area preheating temperature furnace |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
