| 基于混合编程技术的量具CAD系统研究与开发 |
| |
| 引用本文： | 王栋彦,傅强,李向海,李玉兰. 基于混合编程技术的量具CAD系统研究与开发[J]. 工具技术, 2006, 40(11): 80-82 |
| |
| 作者姓名： | 王栋彦 傅强 李向海 李玉兰 |
| |
| 作者单位： | 天津工业大学机械电子学院机制系,300160,天津市;军事交通学院;天津宏大纺织机械有限公司 |
| |
| 摘 要： | 介绍了基于AutoCAD平台的量具CAD系统,讨论了应用ObjectARX与VLISP混合编程开发量具CAD系统的若干关键技术,并给出运行实例。
|
| 关 键 词： | Object ARX VLISP 混合编程 量具 |
Research and Development of Gauge CAD System Based on Mixed Programming |
| |
| Wang Dongyan, Fu Qiang, Li Xianghai et al. Research and Development of Gauge CAD System Based on Mixed Programming[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2006, 40(11): 80-82 |
| |
| Authors: | Wang Dongyan Fu Qiang Li Xianghai et al |
| |
| Affiliation: | Wang Dongyan Fu Qiang Li Xianghai et al |
| |
| Abstract: | Gauge CAD system based on AutoCAD is introduced in this paper, and in addition, the key techniques used in the development of this system, including the mixed programming by Object ARX and VLISP is discussed. In the end, an example is presented. |
| |
| Keywords: | Object ARX VLISP mixed programming gauge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
