首页 | 本学科首页   官方微博 | 高级检索  
     

燃煤锅炉制粉系统的优化运行试验
引用本文:吴东垠,盛宏至,魏小林,余立新,张厚超.燃煤锅炉制粉系统的优化运行试验[J].中国电机工程学报,2004,24(12):218-221.
作者姓名:吴东垠  盛宏至  魏小林  余立新  张厚超
作者单位:1. 天津大学内燃机燃烧学国家重点实验室,天津市,南开区,300072
2. 中国科学院力学研究所,北京市,海淀区,100080
3. 内江发电总厂,四川省,内江市,641005
基金项目:国家自然科学基金项目(50376068)。~~
摘    要:该文在磨煤机出力变化时,进行了优化分离器转速和一次风量的试验。试验发现:当磨煤机出力为12kg/s时,建议分离器转速为85r/min、风粉比为2.0;当磨煤机出力为8kg/s时,建议分离器转速为70r/min、风粉比为2.5。文中得出的风/粉比和分离器转速/给煤量曲线可以指导磨煤机的运行。

关 键 词:磨煤机  出力  分离器  制粉系统  一次风量  燃煤锅炉  风粉  转速  优化运行
文章编号:0258-8013(2004)12-0218-04
修稿时间:2004年5月14日

THE OPTIMIZED EXPERIMENTS OF MILLING SYSTEM FOR COAL-FIRED BOILER
WU Dong-yin,SHENG Hong-zhi,WEI Xiao-lin,YU Li-xin,ZHANG Hou-chao.THE OPTIMIZED EXPERIMENTS OF MILLING SYSTEM FOR COAL-FIRED BOILER[J].Proceedings of the CSEE,2004,24(12):218-221.
Authors:WU Dong-yin  SHENG Hong-zhi  WEI Xiao-lin  YU Li-xin  ZHANG Hou-chao
Abstract:The experimental research has been done to optimize classifier speed of pulverized coal milling system and primary air flow rate of the boiler when the system load is varied. The results show that: when the mill load is 12 kg/s, the recommended classifier speed is 85 r/min and the ratio of air to pulverized coal is 2.0 in mass; when the mill load is 8 kg/s, the recommended classifier speed is 70 r/min and the ratio of air to pulverized coal is 2.5 in mass. The conclusion of the in mass pulverized coal, the curve for classifier speed/coal capacity, both can be used as the guidance for milling system operating.
Keywords:Thermal power engineering  Boiler  Mill  Separator  Primary air  Pulverized coal fineness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号