|
|||||
|
|
| 电镀金刚石圆柱铣刀在数控石材加工中磨损实验研究 | |
| 引用本文： | 齐凤莲,孙志礼,张帼英. 电镀金刚石圆柱铣刀在数控石材加工中磨损实验研究[J]. 金刚石与磨料磨具工程, 2008, 0(6) |
| 作者姓名： | 齐凤莲 孙志礼 张帼英 |
| 作者单位： | 1. 东北大学机械工程与自动化学院,沈阳,110006;沈阳建筑大学交通与机械工程学院,沈阳,110168 2. 东北大学机械工程与自动化学院,沈阳,110006 3. 北方重工集团自控设备厂,包头,014033 |
| 基金项目： | 辽宁省科技厅自然科学基金项目(20072005); 重点实验室开放基金项目(JX200708) |
| 摘 要： | 本文采用正交实验方法,对电镀金刚石涂层刀具在数控石材加工中进行试验,研究加工参数和金刚石颗粒性能对电镀金刚石刀具磨损量的影响,并利用体式显微镜对磨损后的刀具表面形貌进行了分析.试验结果表明:影响金刚石铣刀磨损量的主要因素是金刚石粒度,加工参数中影响较大的是径向切深,其次是主轴转速,进给速度影响较小.刀具底面的磨损比侧面严重,刀具底面的磨损形式主要是犁沟,金刚石主要以脱落为主;侧面的磨损形式主要是磨平,金刚石颗粒以破碎为主. |
| 关 键 词： | 金刚石铣刀 石材加工 磨损 |
Experimental research on wear of electroplated diamond milling cutter when cutting stone on CNC machine |
|
| Qi Fenglian,Sun Zhili,Zhang Guoying. Experimental research on wear of electroplated diamond milling cutter when cutting stone on CNC machine[J]. Diamond & Abrasives Engineering, 2008, 0(6) | |
| Authors: | Qi Fenglian Sun Zhili Zhang Guoying |
| Affiliation: | Qi Fenglian1,2 Sun Zhili1 Zhang Guoying3(1.School of Mechanical Engineering , Automation,Northeastern University,Shenyang 110006,China)(2.School of Traffic &Mechanical Engineering,Shenyang Jianzhu University,Shenyang 110168,China)(3.Factory Automation Equipment,North Heavy Industry Group,Baotou 014033,China) |
| Abstract: | In this article,orthogonal method was applied for the experiment of electroplated diamond milling cutter in cutting stone on CNC machine.The influence of processing parameters and the performance of diamond particles on the wear of electroplated diamond tool is studied.The worn surface of tool was analyzed with stereo microscope.The results showed that the main factors on the wear of diamond milling cutter was the size of diamond particles,the second factor was radial feed depth and rotational speed of spin... |
| Keywords: | diamond milling cutter stone process wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |