|
|||||
|
|
| 模糊控制在烧结终点控制中的应用 | |
| 引用本文： | 申燕 李艳芬. 模糊控制在烧结终点控制中的应用[J]. 冶金自动化, 1998, 22(2): 24-27 |
| 作者姓名： | 申燕 李艳芬 |
| 作者单位： | 东北大学信息科学与工程学院!沈阳110006(申燕，郭文军，王福利)，莱芜钢铁公司自动化部(李艳芬) |
| 摘 要： | 针对烧结终点控制提出前馈 反馈模糊控制的方法。反馈部分为参数自调整模糊控制器 ,终点的计算采用二次曲线拟合法。以中部风箱废气温度变化为前馈输入 ,通过模糊算法得到前馈控制量。相应控制软件在莱芜钢铁厂已得到较好的应用。 |
| 关 键 词： | 烧结终点 模糊控制 前馈-反馈 |
Application of fuzzy control on sinter burn-through point |
|
| Shen Yan Guo Wenjun Wang Fuli. Application of fuzzy control on sinter burn-through point[J]. Metallurgical Industry Automation, 1998, 22(2): 24-27 | |
| Authors: | Shen Yan Guo Wenjun Wang Fuli |
| Abstract: | A feedforward feedback fuzzy control scheme is presented for the control of sinter burn through point. Feedback control is a parameter self tuning fuzzy controller and the burn through point is calculated by quadratic curve method. By using the exhaust gas temperature deviation of the middle windbox as the feedforward input, the feedforward control variable is obtained through fuzzy alogrithm. The control system has been put into use in Laiwu Iron and Steel Company. |
| Keywords: | burn through point fuzzy control feedforward feedback |
| 本文献已被 CNKI 维普 等数据库收录！ | |