|
|||||
|
|
| 不同磁特性填料对环氧胶剪切强度的影响 | |
| 引用本文： | 游敏,刘刚,魏晓红. 不同磁特性填料对环氧胶剪切强度的影响[J]. 现代制造工程, 2005, 0(Z1) |
| 作者姓名： | 游敏 刘刚 魏晓红 |
| 作者单位： | 三峡大学机械与材料学院 宜昌443002 |
| 基金项目： | 湖北省教育厅重大科研项目(2003Z001) |
| 摘 要： | 采用自制的装置研究了在环氧胶中加入不同磁特性的填料后,对经磁场处理钢-环氧胶接头剪切强度的影响。研究结果表明:逆磁性填料对磁处理效果的影响不明显;顺磁性填料可进一步提高磁处理效果;加入铁磁性填料会由于在胶层中受到明显的磁场力作用导致接头的强度下降。 |
| 关 键 词： | 环氧树脂 磁场 填料 磁特性 剪切强度 |
Effect of fillers on the shear strength of epoxy adhesives exposed in magnetic fields |
|
| You Min,Liu Gang,Wei Xiaohong. Effect of fillers on the shear strength of epoxy adhesives exposed in magnetic fields[J]. Modern Manufacturing Engineering, 2005, 0(Z1) | |
| Authors: | You Min Liu Gang Wei Xiaohong |
| Abstract: | The influence of fillers in epoxy adhesives with different magnetic characteristic is investigated through exposure the single lap joints to magnetic field using the device made by authors ourselves.Results from the experiment show that paramagnetic filler can improve the shear strength of joints obviously through magnetic field treatment(MFT) while no evidently effect occurred with diamagnetic filler.However,the ferromagnetic filler may reduce the effect greatly because of magnetic field force in MFT. |
| Keywords: | Epoxy resin Magnetic field treatment(MFT) Filler Magnetic characteristic Shear strength |
| 本文献已被 CNKI 等数据库收录！ | |