| 增压发动机开式水套缸体缸孔变形优化的研究 |
| |
| 引用本文： | 常明明,宿朋,邱继虎,梁永龙,张堪想,孟祥程,韩玉伟,薛飞.增压发动机开式水套缸体缸孔变形优化的研究[J].柴油机设计与制造,2015(2):36-40. |
| |
| 作者姓名： | 常明明 宿朋 邱继虎 梁永龙 张堪想 孟祥程 韩玉伟 薛飞 |
| |
| 作者单位： | 长城汽车股份有限公司技术中心，河北保定071000; 河北省汽车工程技术研究中心，河北保定071000 |
| |
| 摘 要： | 随着汽车轻量化技术的逐步发展,目前大多数的发动机在设计时会采用铸铝缸体。增压机型在采用铸铝缸体时,一般会设计为开式水套,以便缸孔顶部能够获得更好的冷却效果来满足其高热负荷的要求。但由于开式水套的顶部为全开放式结构(相当于悬臂),所以在装配力、热负荷、爆发压力、活塞侧向敲击力等因素共同影响下,容易发生缸孔变形量大的问题。本文以一款增压机型的铸铝缸体(开式水套)为例,论证优化其缸孔变形量的方法。
|
| 关 键 词： | 增压机型 铸铝缸体 开式水套 缸孔变形 优化 |
Research on Optimization of Cylinder Bore Deformation in Open Water Jacket Cylinder Block of Turbocharged Engine |
| |
| Chang Mingming,Su Peng,Qiu Jihu,Liang Yonglong,Zhang Kanxiang,Meng Xiangcheng,Han Yuwei,Xue Fei.Research on Optimization of Cylinder Bore Deformation in Open Water Jacket Cylinder Block of Turbocharged Engine[J].Design and Manufacture of Diesel Engine,2015(2):36-40. |
| |
| Authors: | Chang Mingming Su Peng Qiu Jihu Liang Yonglong Zhang Kanxiang Meng Xiangcheng Han Yuwei Xue Fei |
| |
| Abstract: | With the development of automotive lightweight technology, cast-aluminum cylinder block is used in most of engines at present. An open water jacket is applied to the cast-aluminum cylinder block in order to gain better cooling performance and to meet the requirement of high thermal load. The cylinder bore deformation is liable to occur because of the top open structure under the influence of assembly force, thermal load, boosting pressure and piston side knock. This paper takes a cast-aluminum cylinder block (open water jacket) as an example to demonstrate the methods of optimization of cylinder bore deformation. |
| |
| Keywords: | turbocharged engine cast aluminum cylinder block open water jacket cylinder bore deformation optimization method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
