| 工业化薄晶体硅太阳电池背电极浆料 |
| |
| 引用本文： | 申兰先,刘祖明,廖华,李景天,涂洁磊. 工业化薄晶体硅太阳电池背电极浆料[J]. 可再生能源, 2008, 26(1): 69-71 |
| |
| 作者姓名： | 申兰先 刘祖明 廖华 李景天 涂洁磊 |
| |
| 作者单位： | 云南师范大学,太阳能研究所,云南,昆明,650092;云南师范大学,太阳能研究所,云南,昆明,650092;云南师范大学,太阳能研究所,云南,昆明,650092;云南师范大学,太阳能研究所,云南,昆明,650092;云南师范大学,太阳能研究所,云南,昆明,650092 |
| |
| 摘 要： | 对薄晶体硅太阳电池的生产工艺和材料进行了试验.通过调整背电极浆料和电池基片厚度,探索了减少太阳电池弯曲度的途径.试验显示,使用薄片铝浆对电池弯曲度的影响有明显改善,弯曲度可降低52%,电池片弯曲度最小为0.55 mm.
|
| 关 键 词： | 薄晶体硅 太阳电池 背电极 浆料 |
| 文章编号： | 1671-5292（2008）01-0069-03 |
| 收稿时间： | 2007-09-14 |
| 修稿时间： | 2007-09-14 |
Back electrode paste of industrialized thin crystalline silicon solar cell |
| |
| SHEN Lan-xian,LIU Zu-ming,LIAO Hua,LI Jing-tian,TU Jie-lei. Back electrode paste of industrialized thin crystalline silicon solar cell[J]. Renewable Energy(China), 2008, 26(1): 69-71 |
| |
| Authors: | SHEN Lan-xian LIU Zu-ming LIAO Hua LI Jing-tian TU Jie-lei |
| |
| Abstract: | Tests have been done on the producing process and the paste material of thin crystalline silicon solar cell. The approaches have been explored to reduce the bending of solar cell by adjusting the back electrode paste and the thickness of silicon substrate. The test shows that the influence of using thin aluminum paste on the bending of solar cell is improved, the camber is reduced by 52%, and the minimum camber of the solar cell is 0.55 mm. |
| |
| Keywords: | thin crystalline silicon solar cells back electrode paste |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
