Kinetic study of slaughterhouse wastewater treatment by electrocoagulation using Fe electrodes |
| |
Authors: | Ahmadian Mohammad Yousefi Nader Van Ginkel Steven W Zare Mohammad Reza Rahimi Sajad Fatehizadeh Ali |
| |
Affiliation: | Social Development & Health Promotion Research Center, Kermanshah University of Medical Sciences, Kermanshah, Iran. |
| |
Abstract: | In this study, treatment of slaughterhouse wastewater by electrocoagulation was investigated in batch system using Fe electrodes. The effect of various variables such as electrode number, current density and operating time was tested. Pollutant removal efficiency increased with increasing electrode number and operating time. The biochemical oxygen demand (BOD(5))(,) chemical oxygen demand (COD), total suspended solid (TSS), and total nitrogen (TN) removal efficiencies using eight electrodes at a contact time of 50 min and a current density of 10 A/m(2) were 66, 62, 60, and 56%, respectively. Higher electrode numbers will allow shorter operating times to achieve certain removal efficiencies. Also, removal efficiencies increased by increasing the current density; the highest removal efficiencies of BOD(5,) COD, TSS, and TN at a contact time of 50 min and a current density of 25 A/m(2) were 97, 93, 81, and 84%, respectively. The results also show that the reactor pH varies directly with the current density; at 25 A/m(2), the reactor pH increased from an initial value of 7.1 to 7.7 after 50 min. The experimental results showed that the kinetics of BOD(5), COD, TSS and TN removal could be fitted adequately using a first order kinetic model (higher R(2)). |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|