| 换热器管束试压工装 |
| |
| 引用本文： | 蔡仁龙,高永春. 换热器管束试压工装[J]. 化工设备与管道, 2000, 37(5): 20-20 |
| |
| 作者姓名： | 蔡仁龙 高永春 |
| |
| 作者单位： | 江苏张家港市圣诺江南化机有限公司,张家港,215600;江苏张家港市圣诺江南化机有限公司,张家港,215600 |
| |
| 摘 要： | 在仅制作束的情况下,提出了浮头式和管板非兼作法兰的Ｕ形管式换热器管头的试压力方案及工装设计思路。
|
| 关 键 词： | 管束 管头 试压工装 |
Structure of Tube Bundle of Heat Exchangers for Pressure Test |
| |
| Cai Renlong,Gao Yongchun. Structure of Tube Bundle of Heat Exchangers for Pressure Test[J]. Process Equipment & Piping, 2000, 37(5): 20-20 |
| |
| Authors: | Cai Renlong Gao Yongchun |
| |
| Abstract: | Under the condition that only the tube bundle was made, the pressure test scheme and the structure design method for the flowing head heat exchangers and U type tube exchangers were presented in this article. |
| |
| Keywords: | tube bundle tube end structure for pressure test |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
