| 面向SLA原型的化学镀镍前处理工艺研究 |
| |
| 引用本文： | 黄春艳,刘洪军,李亚敏.面向SLA原型的化学镀镍前处理工艺研究[J].表面技术,2008,37(1):59-61. |
| |
| 作者姓名： | 黄春艳 刘洪军 李亚敏 |
| |
| 作者单位： | 兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,甘肃,兰州,730050;兰州理工大学,有色金属合金省部共建教育部重点实验室,甘肃,兰州,730050;兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,甘肃,兰州,730050;兰州理工大学,有色金属合金省部共建教育部重点实验室,甘肃,兰州,730050;兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,甘肃,兰州,730050;兰州理工大学,有色金属合金省部共建教育部重点实验室,甘肃,兰州,730050 |
| |
| 摘 要： | 立体印刷快速成型(即SLA)原型件对镍的化学还原不具有催化性,必须经过适当的表面预处理,以保证化学镀覆的实施以及镀层与基体的紧密结合.对SLA原型表面化学镀镍的前处理工艺流程及各工序进行了介绍,讨论了SLA原型件化学镀镍前处理条件的选择.经本工艺处理的SLA原型件更易起镀,化学镀镍后镀层与基体结合良好,镀层光亮致密.
|
| 关 键 词： | SLA原型 化学镀镍 粗化 敏化 活化 立体印刷快速成型 |
| 文章编号： | 1001-3660（2008）01-0059-03 |
| 收稿时间： | 2007-11-21 |
| 修稿时间： | 2007年11月21 |
Pretreatment of Electroless Nickel Plating for SLA Prototype |
| |
| HUANG Chun-yan,LIU Hong-jun and LI Ya_min.Pretreatment of Electroless Nickel Plating for SLA Prototype[J].Surface Technology,2008,37(1):59-61. |
| |
| Authors: | HUANG Chun-yan LIU Hong-jun and LI Ya_min |
| |
| Affiliation: | 1. State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology,Lanzhou 730050, China; 2. Key Laboratory of Non-ferrous Metal Alloys, The Ministry of Education,Lanzhou University of Technology, Lanzhou 730050, China,1. State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology,Lanzhou 730050, China; 2. Key Laboratory of Non-ferrous Metal Alloys, The Ministry of Education,Lanzhou University of Technology, Lanzhou 730050, China and 1. State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology,Lanzhou 730050, China; 2. Key Laboratory of Non-ferrous Metal Alloys, The Ministry of Education,Lanzhou University of Technology, Lanzhou 730050, China |
| |
| Abstract: | The SLA prototype has'' t the catalysis to the nickel chemical recovery; it must pass through the suitable superficial pretreatment, guarantee covers of electroless nickel plating implementation as well as coating and SLA prototype in close integration with. The flow and each procedure of the process were introduced. The selection of pretreatment process conditions of electroless nickel plating on SLA prototype was discussed. SLA prototype treated by the improved process is easier to be plated and has good adhesion after electroless nickel plating. The plating coating is luminous and compact. |
| |
| Keywords: | SLA prototype Electroless nickel -plating Coursing Sensitization Activation SLA |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
