Effect of LaNiO3 electrodes and lead oxide excess on chemical solution deposition derived Pb(Zrx,Ti1 − x)O3 films

The effects of LaNiO₃ (LNO) and Pt electrodes on the properties of Pb(Zr_x,Ti_1 − x)O₃ (PZT) films were compared. Both LNO and PZT were prepared by chemical solution deposition (CSD) methods. Specifically, the microstructure of LNO and its influence on the PZT properties were studied as a function of PbO excess. Conditions to minimize the Pyrochlore phase and porosity were found. Remnant polarization, coercive field and fatigue limit were improved in the PZT/LNO films relative to the PZT/Pt films. Additionally, the PZT crystallization temperature over LNO was 500 °C, about ~ 50 °C lower than over Pt. The crystallization temperature reported here is amongst the lowest values for CSD-based PZT films.