| PLC控制步进电机在车床改造中的应用 |
| |
| 引用本文： | 王立红,金辉,赵越岭.PLC控制步进电机在车床改造中的应用[J].辽宁工学院学报,2009(2):71-73. |
| |
| 作者姓名： | 王立红 金辉 赵越岭 |
| |
| 作者单位： | 辽宁工业大学电气工程学院; |
| |
| 摘 要： | 传统的车床采用继电器-接触器控制,具有接线复杂、体积大、自动化程度低的缺点。本文将PLC控制步进电机用于车床改造中,不仅使系统的可靠性和效率大大提高,更主要是使系统能够精确定位。文中设计了步进电机的控制电路,对步进电机的升降速过程进行了研究。实践表明,经改造后的车床运行平稳,噪声小,升降速过程快,提高了系统的运行速度。
|
| 关 键 词： | PLC 步进电机 车床改造 |
Application of Step Motor Controlled by PLC to Lathe Reform |
| |
| WANG Li-hong,JIN Hui,ZHAO Yue-ling.Application of Step Motor Controlled by PLC to Lathe Reform[J].Journal of Liaoning Institute of Technology(Natural Science Edition),2009(2):71-73. |
| |
| Authors: | WANG Li-hong JIN Hui ZHAO Yue-ling |
| |
| Affiliation: | Electric Engineering College;Liaoning University of Technology;Jinzhou 121001;China |
| |
| Abstract: | The traditional lathe controlled by relay-contactor,had disadvantages of complex circuit,big volume and low degree of automation.The application of step motor controlled by PLC to lathe reform can not only make credibility and efficiency to be raised,but also realize accurate orientation.The hardware of controlling step motor with PLC was designed.The process of stepper motor acceleration-deceleration was researched.Practical use expatiated that the reformed lathe worked steadilily meanwhile,had small noise... |
| |
| Keywords: | PLC step motor lathe reform |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
