Electro-chemical micro drilling using ultra short pulses |
| |
| Authors: | Se Hyun Ahn Shi Hyoung Ryu Deok Ki Choi Chong Nam Chu |
| |
| Affiliation: | a School of Mechanical and Aerospace Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwanak-ku, Seoul 151-742, South Korea;b Department of Precision Mechanical Engineering, Kangnung National University, 123 Jibyeon-dong, Kangnung, Kangwon-do 210-702, South Korea |
| |
| Abstract: | Electro-chemical machining (ECM) has been rarely applied in micro machining because the electric field is not localized. In this work, ultra short pulses with tens of nanosecond duration are used to localize dissolution area. The effects of voltage, pulse duration, and pulse frequency on the localization distance were studied. High quality micro hole with 8 μm diameter was drilled on 304 stainless steel foil with 20 μm thickness. Localization distance can be manipulated by controlling the voltage and pulse duration, and various hole shapes were produced including stepped holes and taper free holes. |
| |
| Keywords: | Author Keywords: Electro-chemical machining Drilling Ultra short pulses Localization |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
