首页 | 本学科首页   官方微博 | 高级检索  
     

基于有限元方法500kV交流输电线路表面电场强度的研究
引用本文:吕建红,彭继文,周建飞,阳金纯,李铁楠.基于有限元方法500kV交流输电线路表面电场强度的研究[J].湖南电力,2011(5):20-23.
作者姓名:吕建红  彭继文  周建飞  阳金纯  李铁楠
作者单位:湖南省电力公司科学研究院;
摘    要:本文基于有限元方法详细讨论了500 kV交流输电线路导线表面电场的分布规律,并定量分析了线路参数及导线表面特性对导线表面最大电场强度的影响.结果表明,线路采用多分裂、大截面、倒三角布置方式,可以降低导线表面电场强度;不光滑导线将导致导线表面电场增大.

关 键 词:有限元法  电晕  分裂导线  表面电场强度

Study on surface electric field intensity for 500 kV transmission lines based on finite element method
LV Jian-hong,PENG Ji-wen,ZHOU Jian-fei,YANG Jin-chun,LI Tie-nan.Study on surface electric field intensity for 500 kV transmission lines based on finite element method[J].Hunan Electric Power,2011(5):20-23.
Authors:LV Jian-hong  PENG Ji-wen  ZHOU Jian-fei  YANG Jin-chun  LI Tie-nan
Affiliation:LV Jian-hong,PENG Ji-wen,ZHOU Jian-fei,YANG Jin-chun,LI Tie-nan(Hunan electric power corporation research institute,Changsha,410007,China)
Abstract:In the paper,the surface electric field distribution of 500 kV transmission line are discussed in detail based on finite element method,and the impact of line parameters and surface characteristics on maximum electric field of transmission line are also analyzed quantitatively.The results verify that the more sub-conductor,large conductor section and inverse triangle configuration design can reduce the surface electric field,while the non-smooth surface can cause the surface electric field enhancement.
Keywords:finite element method  corona  bundle conductor  surface electric field intensity  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号