| 基于人体仿真技术的家具电子开料作业疲劳研究 |
| |
| 引用本文： | 刘永溪,于娜,申黎明,费凡. 基于人体仿真技术的家具电子开料作业疲劳研究[J]. 家具, 2014, 0(6): 6-10 |
| |
| 作者姓名： | 刘永溪 于娜 申黎明 费凡 |
| |
| 作者单位： | 南京林业大学家具与工业设计学院; |
| |
| 基金项目： | 江苏省高校自然基金项目(164104825);江苏高校优势学科建设工程资助项目(PADD);国家级大学生创新创业训练计划项目(164104914) |
| |
| 摘 要： | 运用人体仿真技术,对家具电子开料作业中的人体疲劳进行研究。研究结果表明:蹲姿作业时,推荐腰椎舒适作业角度范围为60°~70°;立姿弯腰作业时,推荐弯腰作业脊柱弯曲角度应大于60°。板料放置高度控制在900 mm以上更有利于保护作业者腰椎的健康安全。
|
| 关 键 词： | 电子开料 人体仿真 作业疲劳 |
The Fatigue Research of the Furniture CNC Saws Operation Based on Human Body Simulation Technology |
| |
| LIU Yong xi,YU Na,SHEN Liming,FEI Fan. The Fatigue Research of the Furniture CNC Saws Operation Based on Human Body Simulation Technology[J]. Fumiture, 2014, 0(6): 6-10 |
| |
| Authors: | LIU Yong xi YU Na SHEN Liming FEI Fan |
| |
| Affiliation: | (College of Furniture and Industrial Design, Nanjing Forestry University, Nanjing 210037, China) |
| |
| Abstract: | The human simulation technology was used to study the human body’s fatigue in the furniture CNC saws operation.The research results show that：when the operator is in a squatting position,the comfortable operation angle of lumbar is recommended ranging from 60 ° to 70 °.When the operator is bowing in a standing position,the comfortable operation angle of lumbar is recommended above 60 °.Sheets placed above 900 mm in height is more conducive to the protection of the health and safety of operators’ lumbar spine. |
| |
| Keywords: | CNC saws human simulation fatigue |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
