Abstract: | A numerical simulation has been performed to clarify the effects of turbulence in a liquid on the deformation of the liquid jet surface into an air flow. The turbulences in the liquid jet were simulated by the Rankin vortices, and the liquid jet surface was tracked numerically by the volume of fluid method. By numerical simulations, the onset of the protrusions on the liquid jet surface is caused by the vortices in the liquid, and the surrounding air flow plays an important role in the amplification of the protrusions. The amplification rate of the trough displacement is proportional to the air‐to‐liquid velocity ratio. At large imposed vortex intensities, the trough displacement increases with the vortex intensity. On the other hand, at small imposed vortex intensities, the amplification of the trough displacement is also affected by factors other than vortex intensity. © 2001 Scripta Technica, Heat Trans Asian Res, 30(6): 473–484, 2001 |