Development and experimental study of large size composite plasma immersion ion implantation device

Plasma immersion ion implantation (PⅢ) overcomes the direct exposure limit of traditional beamline ion implantation,and is suitable for the treatment of complex work-piece with large size.pⅢ technology is often used for surface modification of metal,plastics and ceramics.Based on the requirement of surface modification of large size insulating material,a composite full-directional PⅢ device based on RF plasma source and metal plasma source is developed in this paper.This device can not only realize gas ion implantation,but also can realize metal ion implantation,and can also realize gas ion mixing with metal ions injection.This device has two metal plasma sources and each metal source contains three cathodes.Under the condition of keeping the vacuum unchanged,the cathode can be switched freely.The volume of the vacuum chamber is about 0.94 m3,and maximum vacuum degree is about 5 × 10-4 Pa.The density of RF plasma in homogeneous region is about 109 cm-3,and plasma density in the ion implantation region is about 1010 cm-3.This device can be used for large-size sample material PⅢ treatment,the maximum size of the sample diameter up to 400 ram.The experimental results show that the plasma discharge in the device is stable and can mn for a long time.It is suitable for surface treatment of insulating materials.