| 整体叶轮自由曲面造型的研究 |
| |
| 引用本文： | 周建峰,张文祥.整体叶轮自由曲面造型的研究[J].机械工程师,2010(12):61-63. |
| |
| 作者姓名： | 周建峰 张文祥 |
| |
| 作者单位： | 合肥工业大学工业培训中心,合肥230009 |
| |
| 摘 要： | 介绍了自由曲面造型的基本理论,在UG环境下根据叶片边缘初始数据点,按照相应尺寸要求,做出叶片上下截面,在此基础上采用对截面按照叶片边缘曲线方向进行扫描形成叶片实体的方法。
|
| 关 键 词： | 叶轮 自由曲面造型 |
The Research on the Free-form Surface Modeling of Overall Impeller |
| |
| ZHOU Jian-feng,ZHANG Wen-xiang.The Research on the Free-form Surface Modeling of Overall Impeller[J].Mechanical Engineer,2010(12):61-63. |
| |
| Authors: | ZHOU Jian-feng ZHANG Wen-xiang |
| |
| Affiliation: | (Industrial Training Center of Hefei University of Technology, Hefei 230009, China) |
| |
| Abstract: | This article describes the basic theory of free surface modeling. In the UG environment, according to the initial data point of leaf blade edge and size requirements in accordance with the corresponding, the upper and lower section of leaf blade are made, on above basis scaning on the cross section curves is scanned to form a leaf blade entity of the method in accordance with the direction of leaf blade edge. |
| |
| Keywords: | impeller free-form surface modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
