| 斜滑块内侧抽芯注射模设计 |
| |
| 引用本文： | 杨志立,黄诚驹.斜滑块内侧抽芯注射模设计[J].模具工业,2013(12):52-54. |
| |
| 作者姓名： | 杨志立 黄诚驹 |
| |
| 作者单位： | 武汉职业技术学院,湖北武汉430074 |
| |
| 摘 要： | 通过对斜滑块内侧抽芯注射模3种设计方案的比较,基于塑件自动化生产对注射模的结构要求和二次推出机构原理,确定注射模斜滑块内侧抽芯结构的设计方案,分析了模具的设计要点并简述了模具工作过程。
|
| 关 键 词： | 灯后盖 注射模 内侧抽芯 |
Slanted slider inside core-pulling injection mould for lamp back cover |
| |
| YANG Zhi-li,HUANG Cheng-ju.Slanted slider inside core-pulling injection mould for lamp back cover[J].Die & Mould Industry,2013(12):52-54. |
| |
| Authors: | YANG Zhi-li HUANG Cheng-ju |
| |
| Affiliation: | (Wuhan Polytechnic, Wuhan, Hubei 430074, China) |
| |
| Abstract: | By comparing three design schemes of slanted slider inside core-pulling injection mould, a scheme was determined based on the structure requirement of injection mould for automatic production and the principle of secondary ejecting mechanism. The design key points were analyzed and the working process of the mould was also stated. |
| |
| Keywords: | lamp back cover injection mould inside core-pulling |
| 本文献已被 维普 等数据库收录！ |
